Injury Mortality Query Module Configuration Selection

Overview

Overview

Click on either the Quick Selection or Advanced Selection bar to see a list of measures available. Use the hierarchical folder tree to navigate to the query module that will meet your needs. To see folder contents, click on the folder icon. Clicking on the folder again will hide the menu folder contents. When you click on the text link, it will take you to the query module. For further explanation on the modules, click on the "Help" button to the right.

ICD-9 Injury Data

This IBIS-PH module queries injury data only. Data in this module are consistent with the injury case definitions found in the Consensus Recommendations for Using Hospital Discharge Data for Injury Surveillance (2003) developed by the State and Territorial Injury Program Directors Association (STIPDA) Injury Surveillance Workgroup, available at http://www.stipda.org/documents/hdd.pdf (see pages 7-11).

ICD-10 Injury Data

This IBIS-PH module queries injury data only. Data in this module are consistent with the External Cause of Injury Mortality Matrix for ICD-10 found on the NCHS website at http://www.cdc.gov/nchs/data/ice/icd10_transcode.pdf
Quick Selection (Click here for most commonly used measures)

Select from this list to query deaths from 1999 and later by county and health district. For earlier years and small areas, use Advanced Selection below. 

Count

This module returns the number of deaths.
Injury Count

Crude Rate

A crude rate is a fraction, in which the numerator is the number of people in whom an event occurred during a certain period of time, and the denominator is the total number of people in the population at risk for the same period of time.
Injury Crude Rates
Injury Age-adjusted Rates

Leading Causes of Death by Count

This module calculates the number of deaths for the NCHS 50 leading causes of death, and returns the number of deaths for the leading causes.

You can filter the data by year, age, sex, and geographic area. There are no grouping variables available for this selection.
Leading Causes of Injury Death by Count

Leading Causes of Death by Crude Rate

This module calculates death rates (number of deaths per 100,000) for the NCHS 50 leading causes of death, and returns the death rates for the leading causes.

You can filter the data by year, age, sex, and geographic area.

There are no grouping variables available for this selection.
Leading Causes of Injury Death by Crude Rate

Leading Causes of Death by Age-Adjusted Rate

This module calculates age-adjusted death rates (number of deaths per 100,000, age-standardized to the U.S. 2000 population) for the NCHS 50 leading causes of death, and returns the age-adjusted death rates for the leading causes.

You can filter the data by year, age, sex, and geographic area. There are no grouping variables available for this selection.
Leading Causes of Injury Death by Age-adjusted Rates

Average Age at Time of Death

This module returns the average age at death. You can filter or group the data by cause of death, year, age, sex, and geographic area.
Average Age at Time of Death
Advanced Selection (Click here for Small Area, Years 1998 and before)

Select the Time Period (Different time periods used different systems for coding cause of death) 

County and Local Health District, Years 1998 and before (ICD-9 coding system)

Count

This module returns the number of deaths.
Counts
Crude Rates

Crude Rate

A crude rate is a fraction, in which the numerator is the number of people in whom an event occurred during a certain period of time, and the denominator is the total number of people in the population at risk for the same period of time.
Data table and chart

Quartile Map

A "Quartile" map assigns areas to four groups. Each group includes the SAME NUMBER of areas. For instance, for local health districts, each group includes three areas. Group membership and map color are based on the rank order of area rates, from the lowest rate to the highest. The first quartile is colored white and consists of areas with the lowest rates. Areas with the darkest color have the highest rates. Percentile maps such as this assign 25% of the areas to the "highest" category, even when area rates are very close. In other words, just because an area is in the "highest" category doesn't necessarily mean that the rate is significantly high.
Data table and Quartile Map

High-Low-Same Map

A "High-Low-Same" map assigns areas to three groups. Group membership and map color are based on whether each area's rate is significantly different (higher or lower) from the state rate. An area's rate is considered significantly different if the overall state rate falls outside (above or below) the confidence interval for that area. Maps such as this one may lack color variation if the area rates are based on very few cases and have wide confidence intervals. In other words, just because an area's rate is statistically the "same" as the state rate doesn't necessarily mean that the rate is not meaningfully high or low.
Data table and High-Low-Same Map
Age-adjusted Rates

Leading Causes of Death by Count

This module calculates the number of deaths for the NCHS 50 leading causes of death, and returns the number of deaths for the leading causes.

You can filter the data by year, age, sex, and geographic area. There are no grouping variables available for this selection.
Leading Causes of Injury Death by Counts

Crude Rate

A crude rate is a fraction, in which the numerator is the number of people in whom an event occurred during a certain period of time, and the denominator is the total number of people in the population at risk for the same period of time.
Leading Causes of Injury Death by Crude Rates

Leading Causes of Death by Age-Adjusted Rate

This module calculates age-adjusted death rates (number of deaths per 100,000, age-standardized to the U.S. 2000 population) for the NCHS 50 leading causes of death, and returns the age-adjusted death rates for the leading causes.

You can filter the data by year, age, sex, and geographic area. There are no grouping variables available for this selection.
Leading Causes of Injury Death by Age-adjusted Rates

Average Age at Time of Death

This module returns the average age at death. You can filter or group the data by cause of death, year, age, sex, and geographic area.
Average Age at Death
County and Local Health District, Years 1999 and later (ICD-10 coding system)

Count

This module returns the number of deaths.
Counts
Crude Rates

Crude Rate

A crude rate is a fraction, in which the numerator is the number of people in whom an event occurred during a certain period of time, and the denominator is the total number of people in the population at risk for the same period of time.
Data table and chart

Quartile Map

A "Quartile" map assigns areas to four groups. Each group includes the SAME NUMBER of areas. For instance, for local health districts, each group includes three areas. Group membership and map color are based on the rank order of area rates, from the lowest rate to the highest. The first quartile is colored white and consists of areas with the lowest rates. Areas with the darkest color have the highest rates. Percentile maps such as this assign 25% of the areas to the "highest" category, even when area rates are very close. In other words, just because an area is in the "highest" category doesn't necessarily mean that the rate is significantly high.
Data table and Quartile Map

High-Low-Same Map

A "High-Low-Same" map assigns areas to three groups. Group membership and map color are based on whether each area's rate is significantly different (higher or lower) from the state rate. An area's rate is considered significantly different if the overall state rate falls outside (above or below) the confidence interval for that area. Maps such as this one may lack color variation if the area rates are based on very few cases and have wide confidence intervals. In other words, just because an area's rate is statistically the "same" as the state rate doesn't necessarily mean that the rate is not meaningfully high or low.
Data table and High-Low-Same Map
Age-adjusted Rates

Leading Causes of Death by Count

This module calculates the number of deaths for the NCHS 50 leading causes of death, and returns the number of deaths for the leading causes.

You can filter the data by year, age, sex, and geographic area. There are no grouping variables available for this selection.
Leading Causes of Injury Death by Counts

Leading Causes of Death by Crude Rate

This module calculates death rates (number of deaths per 100,000) for the NCHS 50 leading causes of death, and returns the death rates for the leading causes.

You can filter the data by year, age, sex, and geographic area.

There are no grouping variables available for this selection.
Leading Causes of Injury Death by Crude Rates

Leading Causes of Death by Age-Adjusted Rate

This module calculates age-adjusted death rates (number of deaths per 100,000, age-standardized to the U.S. 2000 population) for the NCHS 50 leading causes of death, and returns the age-adjusted death rates for the leading causes.

You can filter the data by year, age, sex, and geographic area. There are no grouping variables available for this selection.
Leading Causes of Injury Death by Age-adjusted Rates

Average Age at Time of Death

This module returns the average age at death. You can filter or group the data by cause of death, year, age, sex, and geographic area.
Average Age at Death
Utah's 61 Small Areas, Years 1998 and before (ICD-9 coding system)

Count

This module returns the number of deaths.
Counts
Crude Rates

Crude Rate

A crude rate is a fraction, in which the numerator is the number of people in whom an event occurred during a certain period of time, and the denominator is the total number of people in the population at risk for the same period of time.
Data table and chart

Quartile Map

A "Quartile" map assigns areas to four groups. Each group includes the SAME NUMBER of areas. For instance, for local health districts, each group includes three areas. Group membership and map color are based on the rank order of area rates, from the lowest rate to the highest. The first quartile is colored white and consists of areas with the lowest rates. Areas with the darkest color have the highest rates. Percentile maps such as this assign 25% of the areas to the "highest" category, even when area rates are very close. In other words, just because an area is in the "highest" category doesn't necessarily mean that the rate is significantly high.
Data table and Quartile Map

High-Low-Same Map

A "High-Low-Same" map assigns areas to three groups. Group membership and map color are based on whether each area's rate is significantly different (higher or lower) from the state rate. An area's rate is considered significantly different if the overall state rate falls outside (above or below) the confidence interval for that area. Maps such as this one may lack color variation if the area rates are based on very few cases and have wide confidence intervals. In other words, just because an area's rate is statistically the "same" as the state rate doesn't necessarily mean that the rate is not meaningfully high or low.
Data table and High-Low-Same Map
Age-adjusted Rates

Leading Causes of Death by Count

This module calculates the number of deaths for the NCHS 50 leading causes of death, and returns the number of deaths for the leading causes.

You can filter the data by year, age, sex, and geographic area. There are no grouping variables available for this selection.
Leading Causes of Injury Death by Counts

Leading Causes of Death by Crude Rate

This module calculates death rates (number of deaths per 100,000) for the NCHS 50 leading causes of death, and returns the death rates for the leading causes.

You can filter the data by year, age, sex, and geographic area.

There are no grouping variables available for this selection.
Leading Causes of Injury Death by Crude Rates

Leading Causes of Death by Age-Adjusted Rate

This module calculates age-adjusted death rates (number of deaths per 100,000, age-standardized to the U.S. 2000 population) for the NCHS 50 leading causes of death, and returns the age-adjusted death rates for the leading causes.

You can filter the data by year, age, sex, and geographic area. There are no grouping variables available for this selection.
Leading Causes of Injury Death by Age-adjusted Rates

Average Age at Time of Death

This module returns the average age at death. You can filter or group the data by cause of death, year, age, sex, and geographic area.
Average Age at Death
Utah's 61 Small Areas, Years 1999 and later (ICD-10 coding system)

Count

This module returns the number of deaths.
Counts
Crude Rates

Crude Rate

A crude rate is a fraction, in which the numerator is the number of people in whom an event occurred during a certain period of time, and the denominator is the total number of people in the population at risk for the same period of time.
Data table and chart

Quartile Map

A "Quartile" map assigns areas to four groups. Each group includes the SAME NUMBER of areas. For instance, for local health districts, each group includes three areas. Group membership and map color are based on the rank order of area rates, from the lowest rate to the highest. The first quartile is colored white and consists of areas with the lowest rates. Areas with the darkest color have the highest rates. Percentile maps such as this assign 25% of the areas to the "highest" category, even when area rates are very close. In other words, just because an area is in the "highest" category doesn't necessarily mean that the rate is significantly high.
Data table and Quartile Map

High-Low-Same Map

A "High-Low-Same" map assigns areas to three groups. Group membership and map color are based on whether each area's rate is significantly different (higher or lower) from the state rate. An area's rate is considered significantly different if the overall state rate falls outside (above or below) the confidence interval for that area. Maps such as this one may lack color variation if the area rates are based on very few cases and have wide confidence intervals. In other words, just because an area's rate is statistically the "same" as the state rate doesn't necessarily mean that the rate is not meaningfully high or low.
Data table and High-Low-Same Map
Age-adjusted Rates

Leading Causes of Death by Count

This module calculates the number of deaths for the NCHS 50 leading causes of death, and returns the number of deaths for the leading causes.

You can filter the data by year, age, sex, and geographic area. There are no grouping variables available for this selection.
Leading Causes of Injury Death by Counts

Leading Causes of Death by Crude Rate

This module calculates death rates (number of deaths per 100,000) for the NCHS 50 leading causes of death, and returns the death rates for the leading causes.

You can filter the data by year, age, sex, and geographic area.

There are no grouping variables available for this selection.
Leading Causes of Injury Death by Crude Rates

Leading Causes of Death by Age-Adjusted Rate

This module calculates age-adjusted death rates (number of deaths per 100,000, age-standardized to the U.S. 2000 population) for the NCHS 50 leading causes of death, and returns the age-adjusted death rates for the leading causes.

You can filter the data by year, age, sex, and geographic area. There are no grouping variables available for this selection.
Leading Causes of Injury Death by Age-adjusted Rates

Average Age at Time of Death

This module returns the average age at death. You can filter or group the data by cause of death, year, age, sex, and geographic area.
Average Age at Death
Center for Health Data, Utah Department of Health, Salt Lake City, UT 84114-2101, Telephone: 801-538-9191, Fax: 801-538-9346
The information provided above is from the Utah Department of Health's Center for Health Data IBIS-PH web site (http://ibis.health.utah.gov). The information published on this website may be reproduced without permission. Please use the following citation: "Retrieved Thu, 07 August 2008 19:06:22 from Utah Department of Health, Center for Health Data, Indicator-Based Information System for Public Health Web site: http://ibis.health.utah.gov".

Content updated: Wed, 20 Feb 2008 02:35:28 MST